Loading
Lightweight autoclaved aerated concrete blocks for walls. Larger unit size and thin-bed mortar change labour and adhesive estimates versus clay brick.
Educational reference only. Quantities, specifications and price ranges are indicative planning aids — verify with suppliers, codes and your engineer or contractor before purchase or construction.
AAC offers lower density and often faster walling with larger blocks. Fixings, chasing for services and plaster systems should follow manufacturer and engineer guidance.
Use the dedicated quantity tool for planning estimates. Results are indicative — not a substitute for drawings, BOQs or supplier quotes.
Open AAC block calculatorIndicative · Indicative ₹ per block or ₹/m³
Compare landed cost of blocks + adhesive + labour + plaster against brick systems. Piece price alone is misleading.
Browse construction pricesLocation rates move with freight, taxes and local supply. Figures below are planning context only — confirm before budgeting.
Near AAC plants
Lower freight
Breakage in transit is a real cost.
Far from plants
Freight-sensitive
Get delivered quotes including unloading.
Standard wall blocks
Common partition and infill sizes.
Lintels / U-blocks
Specialty shapes where the system provides them.
Not always. Material, adhesive, labour productivity, plaster thickness and structural constraints all affect system cost. Compare full wall assemblies.
Fired clay units for masonry walls. Modular and traditional sizes exist; mortar joints and openings drive quantity.
Hydraulic binder used in concrete, masonry mortar, plaster and screed. Bagged OPC/PPC grades are common on Indian sites.
Cement–sand (or gypsum) coating for walls and ceilings. Thickness and mix differ for internal vs external work.
Decorative and protective coatings for interior and exterior surfaces. Coverage (m²/L) and coats drive litre estimates.
AAC Calculator models openings, joints, wastage and adhesive estimates. Structural suitability must be confirmed for each project.